Flat Panel Partitions
Design with Flat Panel Doors
Flat Panel is a solid slab door with a smooth, uninterrupted face that lets the partition material carry the design.

Definition
What is a Flat Panel door?
A Flat Panel door is a single slab with a smooth face from top to bottom. High Pressure Laminate, Wood Veneer, and Compact Laminate doors pair a core with a decorative face, while Solid Surface doors are one homogeneous material. With no frame, insert, or applied profile, the pattern, grain, or color of the material forms the entire door face.

Compatibility
What Works with Flat Panel
Flat Panel is available in every material Ironwood uses for doors.
Door Selection
Why Choose Flat Panel
Flat Panel is the simplest door construction Ironwood offers. The strengths and considerations below show where it fits and what to account for.
Strengths
Flat Panel presents the partition material as one continuous field, with no frame, insert, or profile interrupting it. Patterns, woodgrains, and solid colors read across the full height of each door, giving the elevation a calm, consistent surface.
Flat Panel is the simplest and most economical door style Ironwood offers. Its slab construction has no frame to assemble and no insert or applied trim to fabricate, which makes it a practical choice for budget-conscious projects.
Flat Panel is a standard door style in every material Ironwood uses for doors, so the door style can follow the material decision rather than narrow it.
A Flat Panel door has a smooth, uninterrupted face with no frame joints, insert edges, or raised profiles, so there are no recesses or seams on the door face to clean around.
Considerations
Flat Panel follows the size limits of the material it is made from. Maximum door height ranges from 84″ in Compact Laminate to 108″ in High Pressure Laminate and Wood Veneer, which can affect full-height privacy designs.
Flat Panel adds no relief, shadow lines, or framing to the door face, so the elevation relies on material, color, and layout for visual interest. In long rows of compartments, that restraint may be weighed against the design intent.
Deeper Dive
Flat Panel Insights
One slab, four materials
The material sets the build
Every Flat Panel door is a single slab. High Pressure Laminate and Wood Veneer doors use an industrial-grade particle board core faced with laminate or veneer, and Compact Laminate doors are self-supporting phenolic with a decorative surface. Solid Surface doors are a homogeneous slab made from two 0.5″ sheets bonded back to back, with no separate face layer.
Edges follow the material. High Pressure Laminate doors carry PVC edge banding, Wood Veneer doors carry veneer banding, and Compact Laminate doors carry color-matched HeH edge banding that hides the black phenolic core. Solid Surface edges are finished in the same material, with no banding applied.
Door height by material
Height follows the material
Flat Panel doors come in standard 58″, 72″, and 84″ heights, and taller doors are limited by the material rather than the door style. Because the slab has no frame, a tall Flat Panel door needs no midrail, which stile-and-rail doors require above 84″.
Door height also sets the default clearance below the door: 12″ for a 58″ door and 9″ for 72″ and 84″ doors. Full-height designs can reduce that gap where mounting hardware and accessibility minimums allow, so height and floor clearance are best settled together.
Why slab doors weigh more
A solid face adds weight
A slab door carries material across its full face, so a Flat Panel door weighs more than a framed door of the same size and material. At 36″ wide and 84″ tall, a Flat Panel door weighs about 100 lb in High Pressure Laminate, 120 lb in Compact Laminate, and 189 lb in Solid Surface. A High Pressure Laminate Captured Panel door of the same size weighs about 71 lb.
Door weight is an input to hinge and closer selection. Heavier doors may require a closer, and a closer requires a headrail or transom above the door. Confirming door height and width early keeps hardware choices aligned with the design.
The Process
How to Specify Ironwood
A complete Ironwood specification in three steps.
Open the Spec Builder
A few guided choices turn your design intent into an exact Ironwood model number.
Download Your Spec Package
A CSI spec, cut sheet, and technical data are generated instantly for your exact model.
Send It or Ask Us Anything
Call 360-568-1823 or email specs@ironwood-mfg.com. Our specialists walk projects end-to-end.
What You Walk Away With
- CSI Spec
- Cut Sheet
- Technical Data
Common questions about Flat Panel
- A Flat Panel door is a single slab with an uninterrupted face. Stile-and-rail doors frame an insert or louver slats with vertical stiles and horizontal rails, which adds visible detail and typically reduces door weight. Captured Panel and Louver are stile-and-rail styles, while Applied Molding adds profiles to a slab base for a framed appearance.
- Flat Panel doors are available in High Pressure Laminate, Wood Veneer, Compact Laminate, and Solid Surface. Ironwood does not manufacture Engineered Stone doors, so stone partitions pair stone panels and pilasters with doors in another material.
- Yes, in Compact Laminate or Solid Surface, which tolerate recurring water contact in shower compartments and pool-area restrooms. High Pressure Laminate and Wood Veneer Flat Panel doors are not suited to those areas.
- Yes. Zero Sightline rabbets the door and pilaster edges so they overlap as a lap joint, leaving no visible gap when the door is closed. Each lapped edge adds 0.375″ to the finished door width, and the hinge type determines which edges can lap.
- Yes. Custom Shape doors use the same slab construction as Flat Panel, routed to a curved top, radiused corners, or an outline drawn by the designer. The hinge edge and latch zone stay straight for hardware. Each design receives an engineering review, and DXF or DWG files are preferred.
Maximum Flat Panel door height depends on the material: 108″ for High Pressure Laminate and Wood Veneer, 96″ for Solid Surface, and 84″ for Compact Laminate. Standard heights are 58″, 72″, and 84″. Mounting style, ceiling height, and hardware clearances may set a lower limit on a given project.
Yes. Accessibility depends on compartment size, door location, a clear opening of at least 32″ with the door open 90 degrees, self-closing operation, and hardware type and height. Flat Panel construction does not change those requirements. Final review rests with the local authority having jurisdiction.
Gallery
Featured Flat Panel Installations
Compare materials and mounting styles across completed Flat Panel projects.
High Pressure Laminate · Floor to Ceiling
High Pressure Laminate · Headrail Braced
High Pressure Laminate · Headrail Braced
Compact Laminate · Headrail Braced
Compact Laminate · Floor to Ceiling
Compact Laminate · Floor to Ceiling
High Pressure Laminate · Headrail Braced
Other Door Styles
Looking for a different door style?
Door style sets how a partition reads in elevation, from a plain slab to framed inserts, louvers, molding, engraving, and inlay. Each style works within the limits of the material and mounting style chosen first.
Applied Molding
A slab door with decorative molding profiles adhered to the face in a picture-frame layout, available in six standard profiles on High Pressure Laminate, Wood Veneer, Compact Laminate, and Solid Surface.
Barn X
Captured-panel door with 4″-wide moldings applied in a diagonal X or Z pattern that recalls the cross bracing of a barn door.
Captured Panel
Captured Panel holds an opaque insert within a stile-and-rail frame, giving the door a recessed panel with a Shaker or Craftsman appearance.
Custom Shape
A custom variant of the slab door with its outline CNC-routed to a non-standard profile, such as a curved top, rounded corners, an outhouse-style peak, or a free-form shape. Available in High Pressure Laminate, Wood Veneer, Compact Laminate, and Solid Surface.
Door Lite
Stile-and-rail door with a translucent acrylic or architectural glass insert that admits light while maintaining privacy. The translucent counterpart to Captured Panel.
Engraving
Engraving cuts patterns, logos, or text into the face of a slab door, exposing the layer beneath for contrast. It is available in High Pressure Laminate, Wood Veneer, Compact Laminate, and Solid Surface.
Inlay
Inlay doors set a second material into a slab face, CNC-cut to an essentially flush fit. Available in High Pressure Laminate, Wood Veneer, and Compact Laminate, with Solid Surface as a custom option.
Louver
Louver doors set fixed, overlapping slats in a stile-and-rail frame, giving the partition a shutter-like face that blocks direct sightlines while allowing air to circulate.
