Care and Maintenance

Ironwood toilet partition care and maintenance guidance is organized around the material or component being cleaned. Review the instructions for partition surfaces, acrylic inserts, and hardware before selecting a cleaning method. The maintenance guide and individual material sections identify the routine care information relevant to those surfaces.

Woodgrain louvered partition doors in a country club restroom

Explore Materials

Compact Laminate (CPL) line drawing

Compact Laminate (CPL)

Everyday Care

  • Clean with mild soap and water, a non-abrasive cleaner, or standard restroom cleaning chemicals.

Dry

  • Rinse and wipe dry.

Avoid

  • Avoid abrasive cleaners and scouring pads, which dull the finish.

General Care

  • Use a soft, clean cloth with mild soap and water.
  • Rinse away soap residue and wipe surfaces dry.
  • Pay special attention to edges, splices, and door bottoms.
  • Follow the instructions for each material when choosing a cleaner.
  • Test a cleaner suitable for the material on a concealed area before use.

Maintenance

  • Inspect fasteners periodically and tighten any that have loosened with use.
  • Check that doors move freely and align properly.
  • Lubricate hinges if necessary.
  • Check for signs of vandalism, wear, or damage.
  • Address loose or damaged components promptly.

What to Avoid

  • Abrasive scouring pads. Scratch and dull the surface finish.
  • Strong solvents. Can soften, discolor, or etch laminate and solid surfaces.
  • Wax-based polishes. Build a film that traps soil and attracts streaking.

Specialty Care

Acrylic Inserts

Clean acrylic inserts with mild soap and water only. Avoid ammonia-based or solvent-based cleaners, which can degrade acrylic.

Hardware Care

Clean hardware with a soft cloth, mild soap, and water. Rinse and dry.

  • Stainless steel hardware. Wipe with a soft damp cloth and dry to prevent water spotting.
  • Brackets and pilaster shoes. Wipe clean. Do not use abrasive pads that scratch the finish.
  • Latches and pulls. Keep moving parts free of debris. Lubricate sparingly if action stiffens.

Hardware Finishes

Anodized Aluminum

  • Routine cleaning: Clean with a soft cloth, mild soap, and water. Rinse and wipe dry.
  • Avoid: Abrasive pads and strong solvents.

Stainless Steel

  • Routine cleaning: Wipe with a soft damp cloth and dry to prevent water spotting.
  • Avoid: Abrasive pads and strong solvents.

Zamac / Chrome

  • Routine cleaning: Clean with a soft cloth, mild soap, and water. Rinse and wipe dry.
  • Avoid: Abrasive pads and strong solvents.

Powder Coat

  • Routine cleaning: Clean with a soft cloth, mild soap, and water. Rinse and wipe dry.
  • Avoid: Abrasive pads and strong solvents.

Keep cleaning water away from core materials. Contact an Ironwood specialist before using other cleaners or treatments for stubborn stains.

Resources & Support