Find Your Door Style

Door style sets the look of the compartment, and the material determines which styles are available.

  • Flat Panel

    Best forBudget-conscious and high-traffic projects

    A solid slab door with a smooth, uninterrupted face.

    Construction
    Slab
    Complexity
    $
    Max Height
    84″ to 108″
  • Applied Molding

    Best forPicture-frame trim

    A slab door with molding profiles adhered to the face.

    Construction
    Slab with trim
    Complexity
    $$
    Max Height
    84″ to 108″
  • Louver

    Best forAir circulation through the door

    Fixed, overlapping slats in a stile-and-rail frame block direct sightlines.

    Construction
    Stile and rail
    Complexity
    $$$
    Max Height
    84″ to 108″
  • Door Lite

    Best forLight transfer while maintaining privacy

    A stile-and-rail door with a translucent acrylic insert.

    Construction
    Stile and rail
    Complexity
    $$$
    Max Height
    84″ to 108″
  • Captured Panel

    Best forA recessed panel with a Shaker or Craftsman look

    An opaque insert held in a stile-and-rail frame.

    Construction
    Stile and rail
    Complexity
    $$
    Max Height
    84″ to 108″
  • Engraving

    Best forLogos, text, and patterns

    A slab door with a CNC-cut design that exposes the layer beneath for contrast.

    Construction
    Slab (CNC)
    Complexity
    $$
    Max Height
    84″ to 108″
  • Inlay

    Best forA close-to-flush, multi-material face

    A slab door with a second material CNC-cut and set into the face.

    Construction
    Slab (CNC)
    Complexity
    $$$
    Max Height
    84″ to 108″
  • Barn X

    Best forA barn-door look

    A captured-panel door with 4″-wide moldings in a diagonal X or Z pattern.

    Construction
    Stile and rail
    Complexity
    $$$
    Max Height
    72″
  • Custom Shape

    Best forA non-standard outline from a submitted design

    A slab door with a curved top, rounded corners, or another CNC-routed outline.

    Construction
    Slab (CNC)
    Complexity
    $$$$
    Max Height
    84″ to 108″
Quick referenceProject needs mapped to a door style
Project needDoor style
The lowest costFlat Panel
A Solid Surface doorFlat Panel, Engraving, or Custom Shape; Captured Panel, Applied Molding, or Inlay by project review
Recurring water contactAny style except Inlay, in Compact Laminate
Air circulationLouver
A logo, text, or patternEngraving, or Inlay for a close-to-flush, multi-material face
A recessed panelCaptured Panel
Light transfer through the doorDoor Lite
Picture-frame trimApplied Molding
A barn-door look on doors up to 72″Barn X
A non-standard outlineCustom Shape
Doors over 72″ tallAny style except Barn X

Side by Side

The Essentials, Compared

Construction, complexity, wet-area use, and maximum height by material for each door style.

Comparison of Ironwood partition door styles by construction, complexity, wet-area use, and maximum height in each material
Door StyleConstructionComplexityWet-Area CapableMax Height, HPL and Wood VeneerMax Height, Compact LaminateMax Height, Solid Surface
Flat PanelSlabYesIn Compact Laminate or Solid Surface108″84″96″
Applied MoldingSlab with trimYesWith compact laminate molding108″84″96″Project review
LouverStile and railYesIn Compact Laminate108″84″Not available
Door LiteStile and railYesCompact Laminate frame, waterproof insert108″84″Not available
Captured PanelStile and railYesCompact Laminate or Solid Surface frame, waterproof insert108″84″96″Custom
EngravingSlab (CNC)YesIn Compact Laminate or Solid Surface108″84″96″
InlaySlab (CNC)No108″84″96″Custom
Barn XStile and railYesIn Compact Laminate72″72″Not available
Custom ShapeSlab (CNC)YesIn Compact Laminate or Solid Surface108″84″96″

Complexity is Ironwood's relative build and cost scale. Every style is available in High Pressure Laminate (HPL), Wood Veneer, and Compact Laminate. Ironwood does not make Engineered Stone doors, so stone compartments typically use Wood Veneer Louver doors.

What Comes Next

Door Style Is the Third Core Decision

Hardware follows material, mounting, and door style. Revisit mounting, or assemble the selections in the Spec Builder.

  1. Mounting Styles

    How the partition anchors: Headrail Braced, Floor to Ceiling, Floor Mount, Ceiling Hung, and European.

  2. Spec Builder

    Assemble material, mounting, and door style into a specification.

Next Step

Review Samples and Custom Designs

  • Request Samples

    Material, insert, molding profile, and hardware samples for finish boards and presentations.

  • Review a Custom Design

    A specialist can review custom patterns, inlay artwork, and engraving files.