Barn X Partitions
Design with Barn X
Barn X applies diagonal moldings in an X or Z pattern over a captured-panel door, bringing the cross bracing of a traditional barn door to the partition.

The Barn X Style Chart
Six Standard Barn X Styles
X Style is the default Barn X style. All six styles share the same construction, materials, and height limit, and four of them add a midrail.
Definition
What is Barn X?
Barn X is a captured-panel door with 4″-wide moldings applied over the insert in an X or Z pattern. The stile-and-rail frame holds the insert, and the moldings, made from the door's material, cast shadow lines that echo the bracing of a barn door.

Compatibility
What Works with Barn X
Barn X is built in High Pressure Laminate, Wood Veneer, and Compact Laminate.
Door Selection
Why Choose Barn X
Barn X brings a distinct, rustic character to a captured-panel door. The strengths and considerations below show where it fits and what to account for.
Strengths
Barn X brings the diagonal bracing of a traditional barn door to the partition face. Its applied moldings sit proud of the captured panel and cast shadow lines that suit interiors with rustic, lodge, or farmhouse character.
Barn X is available in six standard styles, from a single diagonal to two Xs stacked on the door. All six share one construction and one set of materials, so the style can be chosen for how it reads in the room.
Barn X is available in High Pressure Laminate, Wood Veneer, and Compact Laminate, with moldings made from the door's material so the face reads as one finish. Compact Laminate Barn X carries the style into restrooms where doors see recurring water contact.
Considerations
Barn X doors and panels are limited to 72″ in all six styles. Taller doors and full-height privacy are not available with Barn X, which may affect the privacy the restroom design expects.
Barn X repeats a pronounced diagonal pattern on every door in the run, and four of the six styles also require a midrail that adds a horizontal rail across the door face. How the diagonals and rails read against surrounding finishes and architecture is best reviewed in elevation during design development.
Deeper Dive
Barn X Insights
Frame, insert, and moldings
A captured panel with moldings on the face
Barn X starts from Ironwood's stile-and-rail captured-panel door: two stiles, a top rail, and a bottom rail joined around an opaque insert that sits in a mortise machined into the frame. Moldings 4″ wide are then applied over the insert in the selected style, with their lengths set for each door by its size and style.
The frame follows standard stile-and-rail dimensions. Where the bottom of the door sits less than 3″ above the floor, the bottom rail increases to 10″ so the frame joints stay above the smooth-surface zone that accessibility guidelines require near the floor.
Diagonals, crosses, and midrails
The style sets the diagonals and the midrail
Barn X is available in six standard styles. Z Style runs a single diagonal from one corner to the opposite corner, and X Style crosses two diagonals in a centered X. Double Z Style sets two parallel diagonals in a zigzag, Double Z Arrow Style adds arrow-like Z accents, Single X centers one X on the panel, and Double X stacks two Xs vertically.
Z Style and X Style need no midrail. The other four styles require one, which adds a horizontal rail across the door face. Because the midrail becomes part of the elevation, the style choice typically settles both the diagonal layout and the horizontal lines of the door.
Where the diagonal reaches its limit
The diagonal sets the maximum height
Barn X doors and panels are limited to 72″ in all six styles. The limit is a matter of appearance: as a component grows taller, the diagonals steepen, and above 72″ the pattern loses the proportions that give Barn X its barn-door character.
Within that limit, Barn X doors use the standard 58″ and 72″ heights, and the selected mounting style may set a lower maximum. Because taller doors are not available, Barn X is not suited to full-height privacy, and the coverage a compartment provides depends on the door height and floor clearance the project selects.
Frame, insert, and molding materials
The moldings match the door material
Barn X is built in High Pressure Laminate, Wood Veneer, and Compact Laminate. The moldings are made from the door's material, so the pattern carries the same color or grain as the frame. High Pressure Laminate and Wood Veneer frames use an engineered wood core, and Compact Laminate frames are solid phenolic.
Compact Laminate Barn X uses a thinner insert than a standard Compact Laminate captured panel, which leaves room for the molding on the face. Solid Surface and Engineered Stone are not available for Barn X.
Where the pattern appears
The pattern can continue inside the compartment
Barn X moldings are applied to the front face of the door by default, and both faces are available. Front-only application leaves the inside of the compartment with a plain captured-panel face; molding both faces carries the pattern into the compartment.
The Process
How to Specify Ironwood
A complete Ironwood specification in three steps.
Open the Spec Builder
A few guided choices turn your design intent into an exact Ironwood model number.
Download Your Spec Package
A CSI spec, cut sheet, and technical data are generated instantly for your exact model.
Send It or Ask Us Anything
Call 360-568-1823 or email specs@ironwood-mfg.com. Our specialists walk projects end-to-end.
What You Walk Away With
- CSI Spec
- Cut Sheet
- Technical Data
Common questions about Barn X
- Barn X is built on the same stile-and-rail frame as Captured Panel, with 4″-wide moldings applied over the insert in a diagonal pattern. Applied Molding starts from a slab door and frames the face with shaped or rectangular profiles. Captured Panel also supports doors taller than the Barn X maximum.
- Barn X is available in High Pressure Laminate, Wood Veneer, and Compact Laminate. Solid Surface and Engineered Stone are not available. Ironwood does not build Engineered Stone doors, so stone projects typically use doors in another material, often Wood Veneer, which can carry Barn X.
- Yes, in Compact Laminate. Its frame, insert, and moldings are all made from Compact Laminate, whose solid phenolic construction is more tolerant of recurring water contact in shower compartments and pool-area restrooms. High Pressure Laminate and Wood Veneer Barn X perform well in standard restroom environments but are not intended for direct water exposure or continuously wet conditions.
Barn X is available in six standard styles: Z Style, X Style, Double Z Style, Double Z Arrow Style, Single X, and Double X. All six share the same construction and materials. Double Z Style, Double Z Arrow Style, Single X, and Double X also require a midrail, which adds a horizontal rail across the door face.
Yes. Barn X moldings are applied to the front face by default, and both faces are available. Front-only application leaves the inside of the compartment with a plain captured-panel face, while molding both faces carries the pattern inside and adds weight to the door.
- Barn X doors and panels are limited to 72″ in all six styles, the height at which the diagonal pattern keeps its proportions. As a result, Barn X is not suited to full-height privacy. Doors start at the standard 58″ minimum, and the mounting style may set a lower maximum.
- Barn X is compatible with every Ironwood mounting style that supports its material: Headrail Braced, Floor to Ceiling, European, Ceiling Hung, and Floor Mount. Floor Mount limits pilaster height, so Barn X doors on Floor Mount are typically 58″.
Yes. Barn X doors can be used on accessible compartments. Accessibility guidelines require the push side of a door to be smooth within 10″ of the floor. When the bottom of a Barn X door sits less than 3″ above the floor, its bottom rail increases from 7.5″ to 10″ to keep the frame joints above that zone. Accessibility also depends on compartment size, clearances, and hardware across the layout.
Gallery
Featured Barn X Installations
View the material and mounting configuration used in each featured Barn X installation.
Wood Veneer · Floor Mount
Wood Veneer · Floor Mount
Wood Veneer · Floor Mount
Wood Veneer · Floor Mount
Other Door Styles
Looking for a different door style?
Door style sets how a partition reads in elevation, from a plain slab to framed inserts, louvers, molding, engraving, and inlay. Each style works within the limits of the material and mounting style chosen first.
Applied Molding
A slab door with decorative molding profiles adhered to the face in a picture-frame layout, available in six standard profiles on High Pressure Laminate, Wood Veneer, Compact Laminate, and Solid Surface.
Captured Panel
Captured Panel holds an opaque insert within a stile-and-rail frame, giving the door a recessed panel with a Shaker or Craftsman appearance.
Custom Shape
A custom variant of the slab door with its outline CNC-routed to a non-standard profile, such as a curved top, rounded corners, an outhouse-style peak, or a free-form shape. Available in High Pressure Laminate, Wood Veneer, Compact Laminate, and Solid Surface.
Door Lite
Stile-and-rail door with a translucent acrylic or architectural glass insert that admits light while maintaining privacy. The translucent counterpart to Captured Panel.
Engraving
Engraving cuts patterns, logos, or text into the face of a slab door, exposing the layer beneath for contrast. It is available in High Pressure Laminate, Wood Veneer, Compact Laminate, and Solid Surface.
Flat Panel
A solid slab door with a smooth, uninterrupted face, available in High Pressure Laminate, Wood Veneer, Compact Laminate, and Solid Surface.
Inlay
Inlay doors set a second material into a slab face, CNC-cut to an essentially flush fit. Available in High Pressure Laminate, Wood Veneer, and Compact Laminate, with Solid Surface as a custom option.
Louver
Louver doors set fixed, overlapping slats in a stile-and-rail frame, giving the partition a shutter-like face that blocks direct sightlines while allowing air to circulate.
