Hands-Free Stalls
Hands-Free Toilet Partitions
Hy Lock adds touchless locking to a standard partition door, with no door operator and no hardwiring, for new construction, remodels, and retrofits.

At a Glance
How a Hands-Free Stall Works
Hands-free toilet partitions let occupants lock and unlock a stall without touching the latch. Ironwood builds them with Hy Lock, a battery-powered touchless indicator latch on a standard partition door, with no door operator and no hardwiring. A wave locks or unlocks the door, an outside indicator shows occupied or vacant, and a manual knob works at all times.
- Latch
- Hy Lock touchless indicator latch
- Power
- 4 AA batteries, no hardwiring
- Manual knob
- Meets 2010 ADA Standards Section 309.4
- Projects
- New partitions and retrofits
The Problem
Touchless Locking Without a Building System

A conventional manual latch requires contact to lock and to unlock.
Hy Lock locks and unlocks with a wave inside the stall.Hy Lock touchless latch
Touchless operation that moves the door brings a power supply, controls, and electrical coordination into the project.
Hy Lock runs on four AA batteries, with no hardwiring.How Hy Lock works
Touchless locking should not require replacing partitions still in good condition.
Hy Lock retrofits onto existing Ironwood stalls.Hy Lock compatibility check
In Action
See Hy Lock Work
Close the door, wave to lock, and wave to leave. The video shows an in-swing door. The Hy Lock page covers in-swing and out-swing doors, specifications, and the compatibility check.
01
Close
The latch catches the door and holds it. The light inside turns blue.
02
Wave to Lock
The light turns red, and the indicator outside shows occupied.
03
Wave to Unlock
The light turns green. On in-swing doors set to rest partly open, the door swings open.
Recommended Build
Hands-Free Toilet Partition Configurations
Hy Lock fits every option below, with the recommended choice first on each tab. Automatic opening depends on how the hinges are set.
Approaches Compared
The Recommended Hands-Free Approach
Hy Lock is the only approach compared here that locks without touch and without hardwiring, on a standard partition door.
Touchless, Without Wiring
A wave locks and unlocks the door. Four AA batteries run it, so no power feed or electrical work is needed.
A Standard Partition Door
Hy Lock mounts on a standard door, for new construction, remodels, and retrofits of existing Ironwood stalls.
Works Without Batteries
The manual knob locks and unlocks with or without batteries, and staff can release a locked door from outside.
| Approach | Touchless locking | No hardwiring | Existing stalls | Occupied or vacant | Works without power |
|---|---|---|---|---|---|
| RecommendedTouchless indicator latch (Hy Lock) | YesWave inside the stall | YesFour AA batteries | YesIronwood stalls; others reviewed | YesOutside indicator | YesManual knob |
| Sensor-operated cubicle systems | Yes | NoBuilding power | VariesDoor assembly; project review | VariesBy system | VariesBy system |
| Automatic door operators | Yes | NoWired supply | VariesProject review | VariesBy system | VariesBy system |
| Forearm and foot hardware | NoArm or foot contact | YesNo power | YesMany products | VariesBy product | YesManual |
Other approaches are product categories from published manufacturer literature, November 2026. Varies means it differs by product. Projects that need powered door movement call for a powered door system.
The Process
How to Specify Ironwood
A complete Ironwood specification in three steps.
Open the Spec Builder
A few guided choices turn your design intent into an exact Ironwood model number.
Download Your Spec Package
A CSI spec, cut sheet, and technical data are generated instantly for your exact model.
Send It or Ask Us Anything
Call 360-568-1823 or email specs@ironwood-mfg.com. Our specialists walk projects end-to-end.
What You Walk Away With
- CSI Spec
- Cut Sheet
- Technical Data
Questions
Hands-Free Partition Questions
- Hands-free toilet partitions, also called touchless toilet partitions, touchless bathroom stalls, or hands-free bathroom stalls, are partitions whose stall latch locks and unlocks without being touched. Approaches range from wave-operated latches to motorized door systems. Ironwood builds them with Hy Lock, a touchless indicator latch on a standard partition door, so the partitions stay standard and nothing is hardwired.
- The occupant closes the door, and Hy Lock catches and holds it while the light inside turns blue. A wave locks the door, the light turns red, and the indicator outside shows occupied. A second wave unlocks it and the light turns green. The wave sensor faces into the stall and responds only to a hand moved deliberately into the sensing area. The Hy Lock page shows each step.
Hy Lock releases the latch and does not motorize the door. On in-swing doors with gravity hinges set to rest partly open, the door swings open when the occupant waves to unlock. Out-swing doors rest closed. An arm pull, specified with an Ironwood specialist, opens the door for entry, and a push opens it on exit. Accessible-stall doors rest closed, so Hy Lock unlocks them with a wave but does not swing them open.
- Yes, on existing Ironwood stalls. New partitions for new construction or a remodel can also be ordered with Hy Lock. Partitions from other manufacturers vary in hardware, hole patterns, and door construction, so an Ironwood specialist works out each of those retrofits as part of the quote. Surface-mounted latches are the simplest to replace, latches built into the door cannot take Hy Lock, and Ceiling Hung partitions are not recommended. The Hy Lock compatibility check covers door material, hinges, the current latch, and mounting.
Not with Hy Lock. Four AA batteries run Hy Lock for over one year, about 10,000 lock cycles, at 3 to 4 uses an hour, 8 hours a day, 7 days a week. Busier restrooms may need more frequent changes. The batteries are supplied separately from the kit, and a blinking yellow light signals when they run low. There is no hardwired option.
Hy Lock works like a standard indicator latch. It holds its current state, the manual knob locks and unlocks the door, and the indicator outside still shows occupied or vacant. Only the wave operation stops until the batteries are changed.
- Hy Lock's manual operation meets 2010 ADA Standards Section 309.4. The knob turns with one hand and under 5 lbf, without tight grasping, pinching, or twisting of the wrist. The latch alone does not make a compartment accessible. Accessible-stall doors rest closed and keep their clearances and other requirements. Confirm the adopted code and the authority having jurisdiction for each project. The Hy Lock accessibility data lists the standards.
No. Hy Lock's manual knob inside unlocks the door at all times, with or without batteries. From outside, staff can release a locked door with the hex key supplied in each kit.
No. Hy Lock's wave sensor faces into the stall and works only while the door is closed and caught. If no one waves within 45 seconds of closing the door, hands-free operation turns off until the door opens again. After a wave lock, hands-free unlocking stays available for 20 minutes, then the knob takes over.
- Motorized systems move the door and need a power supply, controls, and electrical coordination, and each added component and trade adds to the installed cost. Hy Lock automates the lock rather than the door. It runs on batteries and installs on a standard partition door, so a hands-free upgrade stays within the partition scope for new construction, remodels, and retrofits. Projects that need powered door movement call for a powered door system, confirmed with its manufacturer. The comparison table sets out each approach.
- Hy Lock is priced by quote. Quotes cover the complete kit for each door, in the chosen finish and quantity, and volume and trade pricing are available on request. No electrical work is involved, and on new partitions Hy Lock is added to the partition quote and ships with the stalls. The Hy Lock quote request takes door counts by swing.
- High Pressure Laminate, Compact Laminate, and Wood Veneer doors take Hy Lock. Solid plastic, metal, Solid Surface, and Engineered Stone doors go to an Ironwood specialist for review. Hy Lock comes in Satin Aluminum and Matte Black finishes, its through-bolts are matched to the door thickness, and it is available on all three Ironwood series.
- Not on the door. A door with Hy Lock carries no hook or bumper, so the hook and bumper mount on the adjacent panel, pilaster, or wall. On a retrofit, the existing hook moves off the door. Coat hooks and bumpers covers placement.
- For new partitions, add the Hy Lock CSI spec insert to a Section 10 21 13 toilet compartment specification. For existing partitions, use the three-part CSI guide specification. Ironwood is the exclusive distributor in the United States and Canada, and Hy Lock carries a 2-year limited warranty.
Next Steps
Start a Hands-Free Project
Request a Hy Lock Quote
Quotes cover the complete kit for each door, for new partitions or existing stalls. Stall photos help with a retrofit.
Build Your Spec
Configure a Compact Laminate, Headrail Braced, Flat Panel build with Zero Sightline, then add Hy Lock to the partition quote.
Check Compatibility
Four questions on door material, hinges, the current latch, and mounting decide fit on existing stalls.


