Hardware · Latches

Strikes and Keepers

A strike stops the door at the pilaster, and a keeper holds the latch bolt. Ironwood selects the appropriate parts based on the latch, the hinge, and the strike edge.

Closed-slot and open-slot keepers with black bumpers, shown side by side

Definition

Strikes, Keepers, and Combination Units

A strike and a keeper mount on the pilaster at the latch edge of the door. The strike stops the door from swinging past the pilaster, and the keeper receives the latch bolt and holds the door shut. These parts are used only for specific combinations of edge profile and latch. Zero Sightline doors and latches that ship with their own keeper, such as Hy Lock, do not use them. When a door needs them, Ironwood selects the appropriate parts.

Line drawing of strike plates and keepers

Compatibility

What Strikes and Keepers Work With

These strikes and keepers are used only in specific, limited instances based on the edge profile and latch type.

Deeper Dive

The Technical Details

Downloads

Latches Reference Documents

General reference documents for this hardware family. Document coverage varies by hardware type.

Strikes and Keepers FAQs

Team around a conference table, one person raising a hand to ask a question

Cannot find the answer you are looking for? Our specialists are happy to walk projects end-to-end.

Contact Us
  • A strike stops the door from swinging past the pilaster. A keeper receives the latch bolt and holds the door shut. When used, one combination unit does both.

  • No. When a door needs them, Ironwood selects the strike and keeper. The latch, the hinge, the door swing, the hardware material, and the strike edge set the pairing.

  • No. A Zero Sightline strike edge uses no separate strike or keeper.

  • An open-slot keeper allows lift-over when paired with a lifting hinge and no door closer. Lifting hinges include surface mount, vault, and continuous spring. A closed-slot keeper or a closer prevents lift-over, so emergency access relies on the latch's external release.

  • Yes. Cast and stamped stainless steel strikes and keepers can be powder coated.