Surface Mount Hinge
Best forMost Partition Doors
Surface mount is Ironwood's default partition hinge.
- Closing
- Gravity return
- Orientation
- Handed

Hinge type sets how the door closes and which emergency access the stall allows. Where no condition applies, surface mount is the default.
Best forMost Partition Doors
Surface mount is Ironwood's default partition hinge.

Best forConcealed Pivot Look
Vault is a top-and-bottom pivot hinge for Compact Laminate doors.

Best forSoft Self-Close
Continuous cam hinges return doors with a soft cam action and cover the hinge-side gap.

Best forSelf-Closing with Lift
Continuous spring is a full-length partition hinge that self-closes on an integral spring.

Best forA Hidden Hinge Line
Concealed hinges sit in machined pockets in the door and pilaster edges, so the hinge line disappears.

Best forTall Solid Surface Doors
Continuous geared hinges carry very heavy doors and require an overhead closer.

| Project condition | Hinge type |
|---|---|
| Solid Surface doors | 58″: three Surface Mount hinges, no closer required. 59–70″: unavailable. 71″ and taller: Continuous Geared with an overhead closer. |
| A door that hinges off a wall | Surface Mount or Vault |
| Zero Sightline on the hinge side | Surface Mount (limited) or Vault (limited) |
| Heavy doors | Concealed or Continuous Geared |
| Doors in mixed orientations | Vault, Continuous Cam (0° models), or Concealed |
| No special condition | Surface Mount |
Side by Side
Closing action, emergency lift, Zero Sightline, flat-hinge mounting, and orientation for every hinge type.
| Hinge type | Closing action | Lifts for emergency access | Zero Sightline, hinge side | Flat hinge | Orientation |
|---|---|---|---|---|---|
| Surface Mount | Gravity returnDefault | Yes | YesPer door width rules | Yes | Handed |
| Vault | Gravity return | Yes | YesBoeing Cut, per door width rules | Yes | Universal |
| Continuous Cam | Cam (soft) | No | NoStrike side only | No | 0° universal; 20° typically inswing |
| Continuous Spring | Spring (firm) | Yes | NoStrike side only | No | Handed |
| Concealed | Optional spring or integral closing; closer required without either | No | NoStrike side only | No | Universal |
| Continuous Geared | None, closer required | No | NoStrike side only | No | Swing-specific |
Surface Mount is the default unless a material, mounting, or sightline condition points to another type. Types marked limited depend on the door configuration. Doors over 100 lb require a closer, except 58″ Solid Surface doors on three surface mount hinges. A closer disables lift-over access.
Next hardware choices
Lifting hinges need an open-slot keeper for lift-over emergency access, and accessible doors carry pulls on both sides.
A standard slide latch or an indicator lever latch, each paired with a strike or keeper.
A bar pull, a D-pull, or a dummy lever on the door face.
Confirm Your Hinge Type
Our specialists can review door weight, Zero Sightline, and flat-hinge conditions before the hinge is specified.
Hardware samples alongside material swatches for presentations and finish boards.
Combine material, mounting, door style, and hardware into a complete specification.