Hardware · Latches

Indicator Lever Latch

The indicator lever latch is the standard Ironwood indicator latch. It locks a partition door with a lever and shows occupied or vacant status outside the stall.

Indicator lever latch parts: a lever on a round rose, a keeper, and an indicator faceplate with a green window and coin slot

Definition

How the Indicator Lever Latch Works

The indicator lever latch mounts on the door and locks the stall with a lever. A window on the outside face of the door shows whether the stall is occupied or vacant. The lever works with one hand, without tight grasping, pinching, or twisting, so the latch meets the ADA latch requirements in Section 309.4. A coin slot in the faceplate allows the door to be unlatched from outside in an emergency.

Line drawing of an indicator lever latch

Compatibility

What the Indicator Lever Latch Works With

The indicator lever latch fits every Ironwood door material and both strike-edge conditions.

Deeper Dive

The Technical Details

Downloads

Latches Reference Documents

General reference documents for this hardware family. Document coverage varies by hardware type.

Indicator Lever Latch FAQs

Team around a conference table, one person raising a hand to ask a question

Cannot find the answer you are looking for? Our specialists are happy to walk projects end-to-end.

Contact Us
  • Yes. The indicator lever latch meets Section 309.4 of the 2010 ADA Standards. It operates with one hand, without tight grasping, pinching, or twisting, at a maximum operating force of 5 lb.

  • Yes. Accessible compartment doors take separate pulls on both sides near the latch, and the back-to-back bar pull is the Ironwood default for them. The lever on the indicator lever latch does not replace them.

  • A coin slot in the faceplate allows the door to be unlatched from outside. Lift-over access also requires a lifting hinge, an open-slot keeper, and no door closer. With a closed-slot keeper or a closer, emergency access relies on the coin slot.

  • Yes. A Zero Sightline strike edge uses no separate strike or keeper with the indicator lever latch. A flat-strike version with its own keeper covers flat-strike doors.

  • Yes. The indicator lever latch can be powder coated. The powder coat hardware color chart lists the available colors.