Hardware · Hinges

Concealed Hinge

A concealed hinge sits in machined pockets in the door and pilaster edges, so the hinge line disappears when the door is closed.

Brushed stainless steel concealed hinge with four mounting holes, one on each leaf

Definition

What is a Concealed Hinge?

Concealed hinges sit in machined pockets in the door and pilaster edges. Ironwood uses optional-spring models and integral-closing models. An optional spring or integral closing mechanism returns the door; doors with neither need an overhead closer. Hinge count follows door height for optional-spring models and door weight for integral-closing models.

Line drawing of a concealed hinge with four mounting holes, one on each leaf

Compatibility

What Concealed Works With

Concealed hinges fit High Pressure Laminate, Wood Veneer, and Compact Laminate, where door thickness sets the closing action. Solid Surface doors are excluded.

Deeper Dive

The Technical Details

Downloads

Hinges Reference Documents

General reference documents for this hardware family. Document coverage varies by hardware type.

Concealed Hinge FAQs

Team around a conference table, one person raising a hand to ask a question

Cannot find the answer you are looking for? Our specialists are happy to walk projects end-to-end.

Contact Us
  • Optional-spring concealed models return the door when fitted with springs; integral-closing models return it on their own. Optional-spring models fitted without springs require an overhead closer. Doors over 100 lb also need a closer, and integral-closing models over 100 lb require engineering review.

  • Optional-spring concealed models use height-based counts for 36″-wide doors: two up to 72″, three from 73″ to 84″, and four over 84″. Integral-closing models use four to eight hinges by door weight, with engineering review above 100 lb.

  • No. Concealed hinges do not lift, so the door cannot be raised over the keeper, and the latch release is the path from outside. Where lift-over access is also needed, surface mount, vault, and continuous spring hinges lift.

  • On the strike side only. A concealed hinge cannot take a Zero Sightline rabbet, so the hinge edge stays flat.

  • No. Concealed hinges are not approved for Solid Surface doors. Solid Surface doors 71″ and taller use continuous geared hinges with a closer, and 58″ doors use three surface mount hinges.