Hardware · Pulls

Bar Pull

The bar pull is Ironwood's default pull, a straight stainless steel pull with recessed standoffs set back from each end.

Straight stainless steel bar pull with recessed standoffs set back from each end

Definition

What Is a Bar Pull?

A bar pull is a straight stainless steel pull, 3/4″ in diameter, with standoffs recessed back from each end. It gives the occupant a grip point for opening and closing the partition door. A single-side bar pull mounts on one face of the door, and a back-to-back bar pull places a pull on each face. Ironwood sets the configuration from the door swing and compartment type.

Line drawing of a bar pull

Compatibility

What the Bar Pull Works With

The bar pull mounts on every standard Ironwood door material and door thickness.

Deeper Dive

The Technical Details

Downloads

Pulls Reference Documents

General reference documents for this hardware family. Document coverage varies by hardware type.

Bar Pull FAQs

Team around a conference table, one person raising a hand to ask a question

Cannot find the answer you are looking for? Our specialists are happy to walk projects end-to-end.

Contact Us
  • Accessible, ambulatory, and outswing doors carry a back-to-back bar pull, one on each face. ADA Section 604.8.1.2 requires a pull on both sides of a wheelchair-accessible compartment door. Standard inswing doors carry one single-side pull.

  • Yes. A ladder pull is a pair of pulls mounted on both faces of a door and fastened through it. Ironwood's back-to-back bar pull is a ladder pull. A ladder pull in another style, called out by part number, is treated as custom hardware.

  • The bar pull fits High Pressure Laminate, Compact Laminate, Wood Veneer, and Solid Surface doors in 3/4″, 1″, and 1-1/4″ thicknesses. It also fits legacy 7/8″ doors.

  • On accessible compartment doors, the pull sits 34″ to 48″ above the finished floor under ADA Section 404.2.7. Where the door has midrails, the pull is mounted in line with them.