Hardware · Pulls

D-Pull

A D-pull is a one-piece formed pull whose own ends stand it off the door. Seen from the side, its profile is the letter D.

Curved one-piece D-pull whose ends form the standoffs

Definition

What Is a D-Pull?

A D-pull is a one-piece pull. The bar is formed so that its ends provide the standoff from the door face. It gives the occupant the same grip point as the bar pull, with a curved profile in place of a straight one. The bar pull is Ironwood's default, so a D-pull is specified when the curved profile is wanted.

Cross-section diagramAdd a diagram via the material's whatIsIt.diagramSrc field.

Compatibility

What the D-Pull Works With

The D-pull fits all four Ironwood door materials.

Deeper Dive

The Technical Details

Downloads

Pulls Reference Documents

General reference documents for this hardware family. Document coverage varies by hardware type.

D-Pull FAQs

Team around a conference table, one person raising a hand to ask a question

Cannot find the answer you are looking for? Our specialists are happy to walk projects end-to-end.

Contact Us
  • A D-pull is one piece, formed so that its own ends stand it off the door. A bar pull is a straight bar with recessed standoffs. Both give the same grip point, and the bar pull is the Ironwood default.

  • A D-pull needs verification against Section 309.4 before use on an accessible compartment door. It may require fingers to operate, while the standard requires operation without tight grasping, pinching, or twisting. The back-to-back bar pull is Ironwood's default for accessible doors.

  • The D-pull comes in brushed cast stainless steel.

  • Yes. The cast stainless steel D-pull has fastener holes that align with the standard, non-indicator slide latch.

  • The D-pull fits High Pressure Laminate, Compact Laminate, Wood Veneer, and Solid Surface doors in 3/4″, 1″, and 1-1/4″ thicknesses, plus legacy 7/8″ doors.