Hardware · Brackets

Continuous Bracket

A continuous bracket is one long bracket that runs most of a component edge. It covers the sightline between the component and the wall or the adjacent component.

Illustrative rendering of a two-ear continuous bracket profile segment with six mounting holes

Definition

What Is a Continuous Bracket?

A continuous bracket is a single bracket, typically 40″ to 90″ long, that spans most of a component edge. It covers the sightline across the physical gap at the connection. Stirrup brackets use short pieces spaced along the edge; both families share core profiles.

Line drawing of a continuous mounting bracket

Compatibility

What Continuous Brackets Work With

Continuous brackets fit the five standard partition materials listed below and all Ironwood mounting styles.

Deeper Dive

The Technical Details

Downloads

Brackets Reference Documents

General reference documents for this hardware family. Document coverage varies by hardware type.

Continuous Bracket FAQs

Team around a conference table, one person raising a hand to ask a question

Cannot find the answer you are looking for? Our specialists are happy to walk projects end-to-end.

Contact Us
  • A continuous bracket covers the sightline across the physical connection gap along most of the component edge. Stirrup brackets hold the same connection with short pieces at a lower cost and leave the space between them open.

  • Continuous brackets are typically 40″ to 90″ long, with a maximum of 119.75″. Their length allows clearance for the shoes, headrail, pedestals, or other hardware at the component ends.

  • Yes. Continuous brackets fit High Pressure Laminate, Compact Laminate, Wood Veneer, Solid Surface, and Engineered Stone.

  • Continuous brackets are used anywhere maximum privacy is important, from offices and schools to sports arenas and correctional facilities.

  • Yes. Full length bracket is an alternate name for a continuous bracket. Ironwood uses the term continuous bracket.