Ironwood Logo
Select Image 1
Select Image 2
Select Image 3
Select Image 4
Select Image 5

Floor Mount

This style offers a clean, modern design.

  • Offers a unique low profile design.
  • A minimum 3" concrete floor for anchoring is required.
  • Children's sizes are available in this style.
  • Not suitable for solid surface or solid plastic partitions.
  • Investigate floor mount options in our Configurator.
Things to

Things to Consider

Consider the following in association with floor mount washroom partitions:

  • Some materials are not appropriate in wet areas.
  • Specific cleaning requirements vary by material.
  • Stall and hardware selections should be appropriate for expected use.
  • Material availability may affect lead times.
  • Some layout configurations are incompatible with floor mount partitions.
  • Job site handling should be minimized.
  • Post tension, radiant heat, and wood floors may preclude installation.

If you have questions about any of these considerations, or have other concerns, please contact us.

Tech Data

Select from the following to download tech data sheets.

pdf symbolFloor Mount Tech Data

Available Options


Floor mount partitions can be manufactured with the following materials:


Floor mount partitions can be upgraded with the following options:

Hardware Materials

The hardware materials available for floor mount partitions include:

  • Chromed Zamac
  • Stainless steel
  • Powder coat

Hardware Configurations

The hardware configurations available for floor mount partitions include:

  • Stirrup brackets
  • Continuous brackets
  • Inset pivot hinges
  • Vault style pivot hinges
  • Continuous piano style hinges
  • Custom door pulls and accessories

If you have further questions about options for floor mount partitions, please contact us or see our Floor Mount Tech Data sheet.

Floor Mounted

Design Details

Floor mounted partitions are an option in restrooms with high ceilings or where a design calls for this style's distinctive lower profile. Floor anchors are the primary source of stability in this configuration; solid structural flooring with a minimum 3” of concrete is required.

Children's size partitions are available in this style.

Due to the weight of solid surface and the physical characteristics of solid plastic, neither is a suitable material for floor mounted partitions. This style also cannot be used in locations with radiant in-floor heating, post tension concrete flooring, or non-reinforced wood floors.


If you have further questions about floor mounted partitions, please contact us or see our Floor Mounted Tech Data sheet.

Image Needed