ironwood manufacturing logo
close

Floor Mount Partitions

Earthy, urban bathroom features honey colored wood veneer partitions with two captured panel doors in floor mount style. Brick and slate walls.
Variegated, brown plastic laminate, floor mount bathroom partitions with four full height, zero sightline feature doors for high privacy.
Large subway tile hotel bathroom shows tan painted laminate partitions with captured panel, bead board insert and brown pilasters. Floor mount style.
Country Club bathroom featuring floor mount, compact laminate partitions with light tan, wood grain captured panel with slightly opened doors.
Upscale Seattle hotel men’s bathroom with two zebrawood veneer floor mount toilet partitions and modern urinal with matching veneer privacy screen.
Elegant marble wall bathroom with interesting, contrasting grain, brown wood veneer, inlay design doors in floor mount configuration.

General Info

Features and guidelines for Floor Mount partitions:

  • Offers a unique low-profile design.
  • A minimum 3″ concrete floor for anchoring is required.
  • Not suitable for Solid Surface or Solid Plastic
  • 70″ AFF maximum.
  • Investigate Floor Mount options in our Configurator.

Material Options

Floor Mount components are available from the following materials:

Product Options

Floor Mount components can be accented with the following product options:

Considerations

Things to note about Floor Mount partitions:

  • Some materials are not appropriate in wet areas.
  • Specific cleaning requirements vary by material.
  • Material availability may affect lead times.
  • Some layout configurations are incompatible with Floor Mount partitions.
  • Job site handling should be minimized.
  • Post tension, radiant heat and wood floors may preclude installation.

In Depth Info

Design Details

Floor Mount partitions are an option in restrooms with high ceilings or where a design calls for this style’s distinctive lower profile. Floor anchors are the primary source of stability in this configuration, making solid structural flooring with a minimum 3” of concrete required.

Due to the physical characteristics of Solid Surface, Stone and Solid Plastic, they are not suitable materials for Floor Mount style. This style also cannot be used in locations with radiant in-floor heating, post tension concrete flooring or non-reinforced wood floors.

Questions

If you have further questions about Floor Mount partitions, Contact Us or see our Floor Mount Tech Data sheet.

menu