Ironwood Logo
Select Image 1
Select Image 2
Select Image 3
Select Image 4
Select Image 5

Headrail Braced

This popular style offers our most stable and economical configuration.

  • Attached to the floor and stabilized at the top of the pilasters with anti-grip aluminum headrail.
  • Recommended for heavy traffic or vandalism prone areas.
  • The most stable and versatile partition style.
  • Low cost.
  • Low maintenance.
  • Our most popular partition style.
  • Investigate headrail braced options in our Configurator.
Things to
Consider
Tech
Data
Available
Options

Things to Consider

Consider the following in association with headrail braced washroom partitions:

  • Some materials are not appropriate in wet areas.
  • Hardware selection should be appropriate for expected use.
  • Specific cleaning requirements vary by material.
  • Job site handling should be minimized.
  • Material lead times vary and may be significant.
  • Over height panels and doors may not meet local ADA requirements.
  • Alcoves over 84" may require headrail cross bracing.

If you have questions about any of these considerations, or have other concerns, please contact us.

Tech Data

Select from the following to view tech data sheets.

pdf symbolHeadrail Braced Tech Data

Available Options

Materials

Headrail braced partitions can be manufactured with the following materials:


Upgrades

Headrail braced partitions can be upgraded with the following options:


Hardware Materials

The hardware materials available for headrail braced partitions include:

  • Chromed Zamac
  • Stainless steel
  • Powder coat

Hardware Configurations

The hardware configurations available for headrail braced partitions include:

  • Stirrup brackets
  • Continuous brackets
  • Inset pivot hinges
  • Vault style pivot hinges
  • Continuous piano style hinges
  • Custom door pulls and accessories

Headrail Materials

Headrail is available with the following options:

  • Clear anodized aluminum
  • Powder coat aluminum
  • Wood veneer

If you have further questions about headrail braced partitions, please contact us or see our Headrail Braced Tech Data sheet.


Headrail Braced

Design Details

Headrail braced partitions attach pilasters to the floor with minimal floor reinforcement required. Extruded aluminum headrail is attached to the top of the pilasters, providing excellent structural stability. Limited structural requirements, low cost, and good stability combine to make headrail braced our most popular style.

The clear anodized aluminum headrail is shaped to deter gripping, pull-ups, or the type of activities that often begin with the words, “Hey, watch this!”

Because of its strength, this style is recommended for areas that expect heavy traffic or the likelihood of rough use. This style is also recommended for restrooms with high ceilings, where floor to ceiling or ceiling hung partitions are not feasible.

Headrail braced partitions require the least amount of post-installation adjustment.

Questions?

If you have further questions about headrail braced partitions, please contact us or see our Headrail Braced Tech Data sheet.

Image Needed