Ironwood Logo
Select Image 1
Select Image 2
Select Image 3
Select Image 4

Engraving

Enter a restroom accented with engraving and be captivated by this unique approach.

  • Engraving can be used to add design elements, messages, logos, advertising, and more.
  • Suitable materials for engraving include wood veneer, solid surface, phenolic, solid plastic, and plastic laminate.
  • Renderings in DXF or DWG file formats are preferred; other formats may incur file conversion costs.
  • Engraving can be added to the front and back of partition doors, pilasters, and panels.
  • Standard engraving designs are available.
  • Investigate engraving options in our Configurator.
Things to
Consider
Tech
Data
Available
Options

Things to Consider

Consider the following in association with engraved washroom partitions:

  • Additional cleaning care may be required.
  • Specific cleaning requirements vary by material.
  • Design complexity will likely impact lead times.
  • Art work file format may affect costs.
  • Tooling patterns may be evident in large, “clear” areas of engraving.
  • Consideration should be given to both surface color and core colors.
  • Core colors vary by material. Contact us for specifics.

If you have questions about any of these considerations, or have other concerns, please contact us.

Tech Data

Select from the following to download tech data sheets.

pdf symbolEngraving Tech Data
pdf symbolEngraving Chart
pdf symbolWood Species Chart

Available Options

Engraving Artwork

Engraving artwork can be:

  • Supplied as custom graphics by the customer in DXF or DWG file formats.
  • Stock engravings from our engraving chart.

Engraving Materials

Engraving can be done in:

  • Wood Veneer (thick stock)
  • Solid Surface
  • Phenolic
  • Solid Plastic
  • Plastic Laminate (HPL)

If you have further questions about options for engraving, please contact us or see our Engraving Tech Data sheet.


Engraving

Design Details

Engravings can be added to the front or back of doors, pilasters, and panels. This accent can enhance a design, repeat a thematic element, convey a message, display a logo, advertise, and more.

Engraving depth varies with the finish materials. As an example, a wood veneer with a nominal thickness of 0.125” would typically be engraved to a depth of 0.063", while a plastic laminate, which is thinner, would be engraved to a more shallow depth.

Engraved laminates show the color of the core material exposed by the engraving . For plastic laminate, the exposed material is dark brown. For phenolic, the exposed material is black. Solid surface and solid plastic materials are homogeneous in color, so the exposed material is the same color and pattern as the surface material.

Engravings are sealed but not filled, so the engraved area is below the surface of the piece.

Renderings of the image(s) to be engraved should be supplied in DXF or DWG file format. Other formats, such as high-resolution AI, CDR, GIF, or JPEG, are also accepted with an additional charge to cover the conversion cost to DXF or DWG . The amount of this charge depends on the source file format and the level of detail in the engraving(s). Please contact us to determine conversion rates if you cannot provide DXF or DWG versions of your design.

For some materials, simple geometric engravings can be a good alternative to applied molding.

Compatibility

All of our partition materials can be engraved, with the exception of stone.

Engraved accents do not affect style options (such as floor mounted or ceiling hung) or size options.

Questions?

If you have further questions about engraving, please contact us or see our Engraving Tech Data sheet.

Ironwood Manufacturing engraved partition design possibilities