Ironwood Logo
Select Image 1
Select Image 2
Select Image 3
Select Image 4
Select Image 5

Floor to Ceiling

This solid style offers extended vertical lines.

  • Recommended for rooms with low to medium height ceilings where additional stability is desired.
  • Maximum recommended floor to ceiling height of 96".
  • Requires backing in the ceiling.
  • Not compatible with suspended ceilings.
  • Investigate floor to ceiling options in our Configurator.
Things to
Consider
Tech
Data
Available
Options

Things to Consider

Consider the following in association with floor to ceiling partitions:

  • Some materials are not appropriate in wet areas.
  • Specific cleaning requirements vary by material.
  • Stall and hardware selections should be appropriate for expected use.
  • Material availability may affect lead times.
  • Some layout configurations are incompatible with floor mount partitions.
  • Job site handling should be minimized.
  • Ceiling heights over 10’ may preclude installation of a floor to ceiling system.
  • Suspended ceiling may preclude installation of a floor to ceiling system.

If you have questions about any of these considerations, or have other concerns, please contact us.


Tech Data

Select from the following to download tech data sheets.

pdf symbolFloor To Ceiling Tech Data

Available Options

Materials

Floor to ceiling partitions can be manufactured with the following materials:


Upgrades

Floor to ceiling partitions can be upgraded with the following options:


Hardware Materials

The hardware materials available for floor to ceiling partitions include:

  • Chromed Zamac
  • Stainless steel
  • Powder coat

Hardware Configurations

The hardware configurations available for floor to ceiling partitions include:

  • Stirrup brackets
  • Continuous brackets
  • Inset pivot hinges
  • Vault style pivot hinges
  • Continuous piano style hinges
  • Custom door pulls and accessories

If you have further questions about options for floor to ceiling partitions, please contact us or see our Floor To Ceiling Tech Data sheet.


Floor to Ceiling

Design Details

Floor to ceiling partitions provide an extra measure of stability in restrooms with ceiling heights of eight feet or less. Even if extra stability is not required, this style can be used to fulfill the overall design objectives of a room.

The eight foot height recommendation stems from the fact that at heights of nine or ten feet, some pilaster configurations may begin to flex. The height at which flexing can occur depends on the particular material being used.

Installation of floor to ceiling partitions requires backing in the ceiling. This backing can be wood, but it must be structurally anchored.

This style is not compatible with suspended ceilings.

Questions?

If you have further questions about floor to ceiling partitions, please contact us or see our Floor to Ceiling Tech Data sheet.

Image Needed