Ironwood Logo
Select Image 1
Select Image 2
Select Image 3
Select Image 4

Ceiling Hung

This style creates a floor area free from obstruction.

  • Ceiling should be no higher than 108” .
  • Pre-installed structural ceiling support is required.
  • Useful in situations where the floor cannot be penetrated.
  • Provides unobstructed floor access.
  • Not suitable for stone, solid surface, or solid plastic partitions.
  • Investigate ceiling hung options in our Configurator.
Things to
Consider
Tech
Data
Available
Options

Things to Consider

Consider the following in association with ceiling hung washroom partitions:

  • Some materials are not appropriate in wet areas.
  • Specific cleaning requirements vary by material.
  • Stall and hardware selections should be appropriate for expected use.
  • Ceiling hung systems will likely require ongoing adjustments to perform properly.
  • Some layout configurations are incompatible with ceiling hung partitions.
  • Job site handling should be minimized.
  • Suspended ceilings may preclude installation of a ceiling hung system.
  • Ceiling over 108" may preclude installation of a ceiling hung system.
  • Structural steel is required and is to be set within 2" of pilaster connection.
  • Stainless pedestals may be added to provide additional stability to the system.

If you have questions about any of these considerations, or have other concerns, please contact us.


Tech Data

Select from the following to download tech data sheets.

pdf symbolCeiling Hung Tech Data

Available Options

Materials

Ceiling hung partitions can be manufactured with the following materials:


Upgrades

Ceiling hung partitions can be upgraded with the following options:


Hardware Materials

The hardware materials available for ceiling hung partitions include:

  • Chromed Zamac
  • Stainless steel
  • Powder coat

Hardware Configurations

The hardware configurations available for ceiling hung partitions include:

  • Stirrup brackets
  • Continuous brackets
  • Inset pivot hinges
  • Vault style pivot hinges
  • Continuous piano style hinges
  • Custom door pulls and accessories
  • Adjustable pedestals

If you have further questions about options for ceiling hung partitions, please contact us or see our Ceiling Hung Tech Data sheet.


Ceiling Hung

Design Details

Ceiling hung partitions are well-suited for restrooms where the floor cannot be penetrated. This includes locations with radiant in-floor heating or post tension concrete flooring.

This style's unobstructed floor area offers the additional benefit of speeding up and simplifying restroom cleanup.

Ceiling anchors are the primary source of stability for these partitions, so structural steel is required and is to be set within 2" of the pilaster connection. Pedestals may be added to provide additional support, but this results in floor obstructions.

Ceiling hung partitions should not be used in restrooms with ceilings over 108” high, and they are not recommended for restrooms with ceilings over 96" high.

This style is not compatible with stone or solid surface, due to weight, or solid plastic, due its physical characteristics. Suspended ceilings may also preclude the use of this style.

Questions?

If you have further questions about ceiling hung partitions, please contact us or see our Ceiling Hung Tech Data sheet.

Ironwood toilet partitions molding possibilities line drawing